Bellwood home Call

Buying appliances for rental properties: a practical Ontario landlord’s guide

8 min read. Published .

Buying appliances for a rental is different from buying for your own home. Several tenants will use them over time, and as the landlord you are responsible for keeping them working. This guide covers what to weigh when you choose, install and manage appliances in Ontario rental properties.

Think like a property owner

Consider the property type, who typically lives there, what tenants in your area expect, how simple the controls are, whether a technician can reach and service each appliance, and whether you can source the same size and type again quickly.

The cheapest appliance is not always the cheapest to own

Instead of ranking brands, ask practical questions before you buy: Is it sturdy enough for several tenants? Can a technician repair it? Are common parts easy to get in Ontario? Is there a clear warranty and a way to reach service? Are filters, seals and vents easy to clean?

Choose appliances for the rental

Standardizing models

Using the same models across units can make repairs and replacements easier, but one weak model repeats across properties and a discontinued model can be hard to replace. Smaller landlords can start by standardizing on size and type and keeping a simple model list.

Energy use and who pays the bill

If tenants pay utilities, efficiency lowers their bills. If utilities are included, it lowers yours. Compare EnerGuide labels only between appliances of the same type and size, and check Natural Resources Canada's list for ENERGY STAR models.

Installation and safety

Match the outlet and circuit to the appliance, vent dryers outside and clean the full vent run, use braided water hoses, keep the manual, and use a qualified installer. Only a TSSA-certified gas technician should install or service gas appliances.

Ontario landlord responsibilities: the law, good practice and your choices

The law. Under the Residential Tenancies Act, 2006, a landlord must keep the rental unit in a good state of repair and fit for habitation, and must comply with health, safety, housing and maintenance standards. The Landlord and Tenant Board explains that this includes keeping appliances the landlord provides in working order. A landlord generally must give at least 24 hours' written notice before entering a unit, stating the reason, between 8 a.m. and 8 p.m., with exceptions such as emergencies.

Good practice. Record each appliance's brand, model and serial number, check appliances at every tenant turnover, clean dryer vents yearly and take repair requests in writing.

Your choice. ENERGY STAR models, standardizing models, premium or basic tier, and extended warranties are purchasing decisions, not legal requirements.

Managing breakdowns

A simple routine keeps things moving: the tenant reports in writing, you diagnose the cause, you approve a written quote, you repair or replace, and you record it and update the tenant. If a problem drags on, a tenant can contact the municipality or apply to the Landlord and Tenant Board.

Total cost of ownership: an illustrative example

Illustrative only, not market data. The numbers are assumptions. Suppose Model A costs $600, Model B costs $900, and delivery and installation is $150 for each. If Model A needs two repair visits at $250 and Model B needs none, the total is $1,250 for A and $1,050 for B, before counting tenant disruption. Your prices and repair history will differ.

We can take this off your list
We repair and install appliances in rental units across the GTA, with a written price before work starts, and offer property management for rental houses, condo units and small buildings. Get a quote. See also our landlord appliance checklist and repair obligations guide.

Sources

General information, not legal advice.

Get a property management quote